Innovation Since 1977
Flex Connectors
PRODUCT CATEGORY: VIBRATION ISOLATION
Product: Flex Connectors
ISAT Seismic Bracing Approved
(Flex Connector Solutions)
ISAT Flex Connectors
ISAT offers a wide variety of flex connector solutions that prevent stresses due to expansion and contraction and compensate for misalignment, solve the problems of pipe motion caused by thermal pipe growth and the movements associated with seismic activity, connect piping to rotating equipment to reduce the transmission of noise and vibration, and to eliminate stresses in piping systems due to misalignment and thermal movement of piping.
Flexible Connectors (KINFLEX)
Application:
Prevent stresses due to expansion and contraction and compensate for misalignment. Absorb the continuing movement experienced in piping systems because of varying ambient temperatures, differences in temperature of materials being handled, and differences in composition. Reduce objectionable noise and vibration in piping systems, compressors, and other pulsating equipment. Flex connectors reduce objectionable noise and vibration in piping systems connected to pumps, compressors, and similar pulsating equipment.
Seismic V-loops
Application:
Seismic V-loops solve the problems of pipe motion caused by thermal pipe growth and the movements associated with seismic activity. Benefits of the seismic V-loops include limited amount of space required for installation and the ability to hold in heat compared to traditional large pipe loops. Another benefit is V-Loops do not introduce thrust loads on the piping systems whereas metal bellows and rubber expansion joints impose significant anchor loads due to the effects of static pressure thrust. The V-loop is a flexible product that does not expand when pressurized and can be manufactured with a variety of end fittings.
Flexible Pipe Connectors
Application:
Flexible pipe connectors shall be used on all piping connected to rotating equipment to reduce the transmission of noise and vibration, and to eliminate stresses in piping systems due to misalignment and thermal movement of the piping. Flexible connectors shall be KINFLEX™ types UTC, FTC, FC, KWA, KMC, BFMC, or V-Loop
Flex Connectors for Copper Piping
Series 410 & 411 Bronze Braided Flex Connectors
Application:
Series 410 & 411 flex connectors are the standard of the industry in braided connectors for copper piping. This style connector is constructed with bronze corrugated hose and braid for flexibility and optimum resistance to flux chemicals. Stainless steel hose and braid is available for higher-pressure ratings. The traditional overall lengths of Series 410 & 411 connectors are designed to isolate equipment vibration and minimum permanent offset. Longer length connectors can be fabricated upon request that will accommodate greater lateral pipe motions.
Series 411 is offered with standard copper sweat/tube ends. Series 410 is built with copper hex male NPT ends These connectors are typically in stock in sizes ranging from 1/2” to 3” diameter.
Flex Connectors for Copper Piping
Series 412 U.L. Vibration Absorbers
Application:
Series 412 flex connectors are ideal for use as either a U.L. rated vibration eliminator in refrigeration applications or as an extended length HVAC connector for copper pipe. Series 412 connectors are offered in the standard bronze braided style or with stainless steel hose and braid, combining the exceptional physical properties of stainless steel hose and braid with copper tube end connections. Our advanced attachment process ensures a positive, corrosion-free end fitting at an economical cost. The end result is high working pressures, high temperature ratings, corrosion resistance, and longer product life. U.L. recognized. Please note that chlorinated or acid flux should not be used in combination with the optional stainless steel braided Series 412 connectors.
Flex Connectors for Copper Piping
Series 413 Flex Connectors Type HP
Application:
Series 413 flex connectors are specifically designed for connecting to H.V.A.C. water equipment. These economically priced assemblies are ideal for heat pump/fan coil applications and are equal to or surpass specifications for most competitive hose assemblies built for similar applications. In addition, Series 413 conforms to ASTM E 84-01 for fire rating.
Series 413 flex connectors are constructed using an EPDM rubber inner core, stainless steel exterior braid, 304L stainless steel crimp ferrules, and either brass or zinc dichromate steel threaded ends. End connections are male solid NPT one end and a swivel adapter producing male swivel NPT on the other end. Operating pressure ratings are calculated at an average of 4:1 safety factor. Available sizes are 1/2″ I.D. through 2″ I.D. and lengths from 12″ overall to 36″ overall.
The Unparalleled Choice for Vibration Isolation Hangers Products, Design, Manufacturing, and Testing, Supported by an Elite Team of Highly Experienced Engineers and a Dedicated Total Support Staff.
What’s your next project? Let’s talk.
How can we help? Call 877-523-6060 (8-5 PST M-F), or for after hours, click our Contact form to request more information.