Innovation Since 1977
Vibration Isolation Mounts
PRODUCT CATEGORY: VIBRATION ISOLATION
Isolation Mounts Models: Titan, AC, RQ, RD & RDS
Vibration
Isolation
Vibration Isolation Mounts
(Models: Titan, AC, RQ, RD & RDS)
ISAT Vibration Isolation Mounts
Vibration isolation mounts for mechanical equipment.
Model TITAN – Modular Seismic and Wind Restraint Vibration Isolator
Application:
The TITAN Modular Seismic and Wind Restraint Vibration Isolator is comprised of two interfacing but independent elements; two or more high deflection, free-standing, housed, large diameter, laterally stable steel springs, and a seismically rated housing. The steel springs are replaceable without having to lift or otherwise remove the supported equipment.
The TITAN isolator/restraint is recommended for equipment mounted on a structural frame or concrete inertia base where the top plate of the isolator can be fully utilized. The modular design of the TITAN allows it to handle loads up to 23,200 lbs. and provide up to 4-inches of deflection.

Model RD/RDS – Elastomeric Vibration Isolators
Application:
Model RD/RDS neoprene mounts are recommended for the isolation of vibration produced by small pumps, vent sets, low pressure packaged air-handling units, and other mechanical equipment. Typical applications are limited to isolation of high frequency vibration generated mechanical equipment having the lowest operating speeds of 1750 RPM when located on a grade-supported slab or pier, and include close-coupled pumps with motors of 5 H.P. or less.
Model RD/RDS neoprene isolation mounts can be used for isolation of mechanical equipment specified to be supported by neoprene rubber or elastomer isolators and with tabulated minimum static deflection up to 0.50″ (13 mm).

Model RQ – Neoprene Isolation Mounts
Application:
Model RQ neoprene isolation mounts can be used for isolation of mechanical equipment specified to be supported by neoprene rubber or elastomer isolators and with tabulated minimum static deflections up to 0.13″ (3 mm). Model RQ neoprene isolation mounts are also selected for use in seismic and windload restraint applications.
Typical applications of Model RQ neoprene isolators are limited to isolation of mechanical equipment having lowest operating speeds of 1750 RPM when located on a grade-supported slab, pier or load bearing wall, and include close coupled pumps with motors of 5 H.P. or less, small vent sets, low pressure packaged air-handling units, wall-mounted electrical transformers and similar equipment types.

The Unparalleled Choice for Vibration Isolation Hangers Products, Design, Manufacturing, and Testing, Supported by an Elite Team of Highly Experienced Engineers and a Dedicated Total Support Staff.
What’s your next project? Let’s talk.
How can we help? Call 877-523-6060 (8-5 PST M-F), or for after hours, click our Contact form to request more information.